To back up your database means to make copies of your datafiles, control file, and archived redo logs (if your database runs in ARCHIVELOG mode). Restoring a database means copying the physical files that make up the database from a backup medium, typically disk or tape, to their original or to new locations. Database recovery is the process of updating database files restored from a backup with the changes made to the database after the backup, typically using redo log files.
Consistent and Inconsistent Backups
A backup is either consistent or inconsistent. To make a consistent backup, your database must have been shut down cleanly and remain closed for the duration of the backup. All committed changes in the redo log are written to the datafiles, so the datafiles are in a transaction-consistent state. When you restore your datafiles from a consistent backup, you can open the database immediately.
If the database is in ARCHIVELOG mode, then you can make inconsistent backups that are recoverable using archived redo log files. Open database backups are inconsistent because the online redo logs contain changes not yet applied to the datafiles. The redo logs must be archived and then backed up with the datafiles to ensure recoverability.
Despite the name, an inconsistent backup is as robust a form of backup as a consistent backup. The advantage of making inconsistent backups is that you can back up your database while the database is open for updates.
Media Recovery
If you restore the archived redo logs and datafiles, then you must perform media recovery before you can open the database. Any database transactions in the archived redo logs not already reflected in the datafiles are applied to the datafiles, bringing them to a transaction-consistent state before the database is opened.
Media recovery requires a control file, datafiles (typically restored from backup), and online and archived redo logs containing changes since the time the datafiles were backed up. Media recovery is most often used to recover from media failure, such as the loss of a file or disk, or a user error, such as the deletion of the contents of a table.
Media recovery can be a complete recovery or a point-in-time recovery. In a complete recovery, you restore backup datafiles and apply all changes from the archived and online redo logs to the datafiles. The database is returned to its state at the time of failure and can be opened with no loss of data.
In a point-in-time recovery, you return a database to its contents at a user-selected time in the past. You restore a backup of datafiles created before the target time and a complete set of archived redo log files from backup creation through the target time. Recovery applies changes between the backup time and the target time to the datafiles. All changes after the target time are discarded.
Oracle Enterprise Manager Database Control (Database Control) provides an interface to both a complete and a point-in-time recovery in the form of a Recovery wizard. However, this guide focuses on complete recovery.
Flash Recovery Area
To simplify the management of backup and recovery files, you can create a flash recovery area for your database. The flash recovery area is an Oracle-managed directory, file system, or Automatic Storage Management disk group that provides a centralized disk location for backup and recovery files. Oracle creates archived logs and flashback logs in the flash recovery area. RMAN can store its backup sets and image copies in the flash recovery area, and it uses it when restoring files during media recovery. The flash recovery area also acts as a disk cache for tape.
Oracle Database automatically manages this storage, deleting files that are no longer needed. Periodically copying backups to tape frees space in the flash recovery area for other files. Oracle recommends that you enable a recovery area to simplify backup management. Except as noted, this documentation assumes the use of a flash recovery area.
RMAN Repository
RMAN maintains a record of database files and backups for each database on which it performs operations. This metadata is called the RMAN repository.
If you back up a file without using RMAN, such as by copying the file at the host operating system level, then you can add metadata about the copy to the RMAN repository. If you later use a command such as RESTORE DATABASE, then RMAN uses the records in the repository to select backups needed for the recovery.
The primary location for the RMAN repository for a database is its control file. The importance of this metadata for RMAN is one more reason why protecting your control file is a vital part of your backup strategy. In some installations, a second copy of the RMAN repository is stored in a schema called the recovery catalog. The recovery catalog is located in a separate database and can store metadata for multiple databases. Use of a recovery catalog is optional and is beyond the scope of this guide.
Oracle 10 DBA Interview questions and answers
1. Is the following SQL statement syntactically correct? If not, please rewrite it correctly.
SELECT col1 FROM tableA WHERE NOT IN (SELECT col1 FROM tableB);
Ans. SQL is incorrect.
Correct SQL : SELECT col1 FROM tableA WHERE col1 NOT IN (SELECT col1 FROM tableB);
2. What is a more efficient way to write this query, to archive the same set?
Ans: SELECT col1 from tableA minus SELECT col1 from tableB
3.How would you determine that the new query is more efficient than the original query?
Ans: Run explain plan on both query and see the result .
4.How can we find the location of the database trace files from within the data dictionary?
Ans: Generally trace file on the database server machine is located in one of two locations:
1. If you are using a dedicated server connection, the trace file will be generated in the directory specified by
the USER_DUMP_DEST parameter.
2.If you are using a shared server connection, the trace file will be generated in the directory specified by the
BACKGROUND_DUMP_DEST parameter.
you can run sqlplus>SHOW PARAMETER DUMP_DEST
or
select name, value
from v$parameter
where name like '%dump_dest%'
5. What is the correct syntax for a UNIX endless WHILE loop?
while :
do
commands
done
6. Write the SQL statement that will return the name and size of the largest datafile in the database.
SQL> select name,bytes from v$datafile where bytes=(select max(bytes) from v$datafile);
7. What are the proper steps to changing the Oracle database block size?
cold backup all data files and backup controlfile to trace, recreate your database
with the new block size using the backup control file, and restore. It may be easier
with rman. You can not change datbase block size on fly.
8. Using awk, write a script to print the 3rd field of every line.
Ans:
awk '{print }'
awk '{print $3}
awk '{print $3}
9.Under what conditions, is a nested loop better than a merge join?
Ans:
Optimizer uses nested loop when we are joining tables containing small number of rows with an efficient driving
condition.
It is important to have an index on column of inner join table as this table is probed every time for a new value
from outer table.
Optimizer may not use nested loop in case:
1. No of rows of both the table is quite high
2. Inner query always results in same set of records
3. The access path of inner table is independent of data coming from outer table.
merge join is used to join two independent data sources. They perform better than nested loop when the volume of
data is big in tables
but not as good as hash joins in general.
10.Which database views would you use to ascertain the number of commits a user's session has performed?
Joining V$SESSTAT ,V$STATNAME
select * from V$SESSTAT a ,V$STATNAME b where b.CLASS=a.STATISTIC# and b.NAME='user commits' and a.sid=
11.What does the #!bin/ksh at the beginning of a shell script do? Why should it be there?
Ans: On the first line of an interpreter script, the "#!", is the name of a program which should be used to
interpret the contents of the file.
For instance, if the first line contains "#! /bin/ksh", then the contents of the file are executed as a korn shell
script.
12.What command is used to find the status of Oracle 10g Clusterware (CRS) and the various components it manages
(ONS, VIP, listener, instances, etc.)?
Ans:
$ocrcheck
13.Describe a scenario in which a vendor clusterware is required, in addition to the Oracle 10g Clusterware.
If you choose external redundancy for the OCR and voting disk, then to enable redundancy, the disk subsystem must be configurable for RAID mirroring/vendor clusterware. Otherwise, your system may be vulnerable because the OCR and voting disk are single points of failure.
14.How would you find the interconnect IP address from any node within an Oracle 10g RAC configuration?
using oifcfg command.
se the oifcfg -help command to display online help for OIFCFG. The elements of OIFCFG commands, some of which are
optional depending on the command, are:
*nodename—Name of the Oracle Clusterware node as listed in the output from the olsnodes command
*if_name—Name by which the interface is configured in the system
*subnet—Subnet address of the interface
*if_type—Type of interface: public or cluster_interconnect
You can use OIFCFG to list the interface names and the subnets of all of the interfaces available on the local node
by executing the iflist keyword as shown in this example:
oifcfg iflist
hme0 139.185.141.0
qfe0 204.152.65.16
You can also retrieve specific OIFCFG information with a getif command using the following syntax:
oifcfg getif [ [-global | -node nodename] [-if if_name[/subnet]] [-type if_type] ]
To store a new interface use the setif keyword. For example, to store the interface hme0, with the subnet
139.185.141.0, as a global interface (to be used as an interconnect for all of the RAC instances in your cluster),
you would use the command:
oifcfg setif -global hme0/139.185.141.0:cluster_interconnect
For a cluster interconnect that exists between only two nodes, for example rac1 and rac2, you could create the cms0
interface with the following commands, assuming 139.185.142.0 is the subnet addresses for the interconnect on rac1
and rac2 respectively:
oifcfg setif -global cms0/139.185.142.0:cluster_interconnect
Use the OIFCFG delif command to delete the stored configuration for global or node-specific interfaces. A specific
node-specific or global interface can be deleted by supplying the interface name, with an optional subnet, on the
command line. Without the -node or -global options, the delif keyword deletes either the given interface or all of
the global and node-specific interfaces on all of the nodes in the cluster. For example, the following command
deletes the global interface named qfe0 for the subnet 204.152.65.0:
oifcfg delif -global qfe0/204.152.65.0
On the other hand, the next command deletes all of the global interfaces stored with OIFCFG:
oifcfg delif -global
15.What is the Purpose of the voting disk in Oracle 10g Clusterware?
Voting disk record node membership information. Oracle Clusterware uses the voting disk to determine which instances are members of a cluster. The voting disk must reside on a shared disk. For high availability, Oracle recommends that you have a minimum of three voting disks. If you configure a single voting disk, then you should use external mirroring to provide redundancy. You can have up to 32 voting disks in your cluster.
16.What is the purpose of the OCR in Oracle 10g Clusterware?
Ans: Oracle Cluster Registry (OCR) is a component in 10g RAC used to store the cluster configuration information. It is a shared disk component, typically located in a shared raw volume that must be accessible to all nodes in the cluster.
The daemon OCSSd manages the configuration info in OCR and maintains the changes to cluster in the registry.
17. In Oracle Streams archived log downstream capture, which database view can be used to determine which archived
logs are no longer needed by the capture process?
Ans: V$ARCHIVE_DEST_STATUS
SELECT col1 FROM tableA WHERE NOT IN (SELECT col1 FROM tableB);
Ans. SQL is incorrect.
Correct SQL : SELECT col1 FROM tableA WHERE col1 NOT IN (SELECT col1 FROM tableB);
2. What is a more efficient way to write this query, to archive the same set?
Ans: SELECT col1 from tableA minus SELECT col1 from tableB
3.How would you determine that the new query is more efficient than the original query?
Ans: Run explain plan on both query and see the result .
4.How can we find the location of the database trace files from within the data dictionary?
Ans: Generally trace file on the database server machine is located in one of two locations:
1. If you are using a dedicated server connection, the trace file will be generated in the directory specified by
the USER_DUMP_DEST parameter.
2.If you are using a shared server connection, the trace file will be generated in the directory specified by the
BACKGROUND_DUMP_DEST parameter.
you can run sqlplus>SHOW PARAMETER DUMP_DEST
or
select name, value
from v$parameter
where name like '%dump_dest%'
5. What is the correct syntax for a UNIX endless WHILE loop?
while :
do
commands
done
6. Write the SQL statement that will return the name and size of the largest datafile in the database.
SQL> select name,bytes from v$datafile where bytes=(select max(bytes) from v$datafile);
7. What are the proper steps to changing the Oracle database block size?
cold backup all data files and backup controlfile to trace, recreate your database
with the new block size using the backup control file, and restore. It may be easier
with rman. You can not change datbase block size on fly.
8. Using awk, write a script to print the 3rd field of every line.
Ans:
awk
awk '{print $3}
awk '{print $3}
9.Under what conditions, is a nested loop better than a merge join?
Ans:
Optimizer uses nested loop when we are joining tables containing small number of rows with an efficient driving
condition.
It is important to have an index on column of inner join table as this table is probed every time for a new value
from outer table.
Optimizer may not use nested loop in case:
1. No of rows of both the table is quite high
2. Inner query always results in same set of records
3. The access path of inner table is independent of data coming from outer table.
merge join is used to join two independent data sources. They perform better than nested loop when the volume of
data is big in tables
but not as good as hash joins in general.
10.Which database views would you use to ascertain the number of commits a user's session has performed?
Joining V$SESSTAT ,V$STATNAME
select * from V$SESSTAT a ,V$STATNAME b where b.CLASS=a.STATISTIC# and b.NAME='user commits' and a.sid=
11.What does the #!bin/ksh at the beginning of a shell script do? Why should it be there?
Ans: On the first line of an interpreter script, the "#!", is the name of a program which should be used to
interpret the contents of the file.
For instance, if the first line contains "#! /bin/ksh", then the contents of the file are executed as a korn shell
script.
12.What command is used to find the status of Oracle 10g Clusterware (CRS) and the various components it manages
(ONS, VIP, listener, instances, etc.)?
Ans:
$ocrcheck
13.Describe a scenario in which a vendor clusterware is required, in addition to the Oracle 10g Clusterware.
If you choose external redundancy for the OCR and voting disk, then to enable redundancy, the disk subsystem must be configurable for RAID mirroring/vendor clusterware. Otherwise, your system may be vulnerable because the OCR and voting disk are single points of failure.
14.How would you find the interconnect IP address from any node within an Oracle 10g RAC configuration?
using oifcfg command.
se the oifcfg -help command to display online help for OIFCFG. The elements of OIFCFG commands, some of which are
optional depending on the command, are:
*nodename—Name of the Oracle Clusterware node as listed in the output from the olsnodes command
*if_name—Name by which the interface is configured in the system
*subnet—Subnet address of the interface
*if_type—Type of interface: public or cluster_interconnect
You can use OIFCFG to list the interface names and the subnets of all of the interfaces available on the local node
by executing the iflist keyword as shown in this example:
oifcfg iflist
hme0 139.185.141.0
qfe0 204.152.65.16
You can also retrieve specific OIFCFG information with a getif command using the following syntax:
oifcfg getif [ [-global | -node nodename] [-if if_name[/subnet]] [-type if_type] ]
To store a new interface use the setif keyword. For example, to store the interface hme0, with the subnet
139.185.141.0, as a global interface (to be used as an interconnect for all of the RAC instances in your cluster),
you would use the command:
oifcfg setif -global hme0/139.185.141.0:cluster_interconnect
For a cluster interconnect that exists between only two nodes, for example rac1 and rac2, you could create the cms0
interface with the following commands, assuming 139.185.142.0 is the subnet addresses for the interconnect on rac1
and rac2 respectively:
oifcfg setif -global cms0/139.185.142.0:cluster_interconnect
Use the OIFCFG delif command to delete the stored configuration for global or node-specific interfaces. A specific
node-specific or global interface can be deleted by supplying the interface name, with an optional subnet, on the
command line. Without the -node or -global options, the delif keyword deletes either the given interface or all of
the global and node-specific interfaces on all of the nodes in the cluster. For example, the following command
deletes the global interface named qfe0 for the subnet 204.152.65.0:
oifcfg delif -global qfe0/204.152.65.0
On the other hand, the next command deletes all of the global interfaces stored with OIFCFG:
oifcfg delif -global
15.What is the Purpose of the voting disk in Oracle 10g Clusterware?
Voting disk record node membership information. Oracle Clusterware uses the voting disk to determine which instances are members of a cluster. The voting disk must reside on a shared disk. For high availability, Oracle recommends that you have a minimum of three voting disks. If you configure a single voting disk, then you should use external mirroring to provide redundancy. You can have up to 32 voting disks in your cluster.
16.What is the purpose of the OCR in Oracle 10g Clusterware?
Ans: Oracle Cluster Registry (OCR) is a component in 10g RAC used to store the cluster configuration information. It is a shared disk component, typically located in a shared raw volume that must be accessible to all nodes in the cluster.
The daemon OCSSd manages the configuration info in OCR and maintains the changes to cluster in the registry.
17. In Oracle Streams archived log downstream capture, which database view can be used to determine which archived
logs are no longer needed by the capture process?
Ans: V$ARCHIVE_DEST_STATUS
Subscribe to:
Post Comments (Atom)
Blog Archive
-
▼
2008
(277)
-
▼
September
(261)
- Setting oracle database in archive mode from non-a...
- Oracle Version Information - How to CheckYour Curr...
- Database and Instance Shutdown
- Database and Instance Shutdown
- What Happens When You Open a Database
- How to Identify Your Oracle Database Software Release
- What is block change tracking in RMAN Oracle 10g
- What is Incremental Merge in RMAN 10g?
- Moving from DBMS_JOB to DBMS_SCHEDULER
- Moving from DBMS_JOB to DBMS_SCHEDULER
- Moving from DBMS_JOB to DBMS_SCHEDULER
- Moving from DBMS_JOB to DBMS_SCHEDULER
- Oracle Database 10g Scheduler - Associating Jobs w...
- Oracle Database 10g Scheduler - Creating Jobs With...
- Oracle Database 10g Scheduler
- DBMS_JOB Package
- Data Guard Database Synchronization Options
- Data Guard Role Management
- Data Guard Broker
- Data Guard Protection Modes
- Redo Apply and SQL Apply
- Data Guard Benefits
- Creating a Nested Materialized View: Example
- Creating a Fast Refreshable Materialized View: Exa...
- Automatic Refresh Times for Materialized Views: Ex...
- Periodic Refresh of Materialized Views: Example
- Creating Rowid Materialized Views: Example
- Creating Primary Key Materialized Views: Example
- Creating Subquery Materialized Views: Example
- Creating Prebuilt Materialized Views: Example
- Creating Materialized Join Views: Example
- Creating Materialized Aggregate Views: Example
- Privilages to create a refresh-on-commit materiali...
- Privilages to create a materialized view in anothe...
- What Privilages required to create a materialized ...
- What is materialized view?
- What is Optimizer Plan Stability?
- DBMS_ADVISOR Package
- What is Bigfile tablespace? why do we create it? w...
- Reverting a Table to its Previous Statistics
- Manipulating Statistics Using DBMS_STATS
- Copying Statistics Using DBMS_STATS
- Gathering statistics with DBMS_STAT Package
- Handling Errors During Backups: Example
- Backup Validation with RMAN
- Detection of Logical Block Corruption
- Detecting Physical and Logical Block Corruption
- Tests and Integrity Checks for Backups?
- When RMAN Performs Control File Autobackups
- How RMAN Performs Control File Autobackups?
- what command do you execute to ensure that the con...
- Which background processes coordinates the rebalan...
- Which background processes coordinates the rebalan...
- What is oracle ASM in Oracle 10g? How do we create...
- Load Balancing In Oracle 10g Real Application Clus...
- Oracle 10gR2 load balancing - Server side load bal...
- Oracle 10gR2 load balancing- Client-Side Connectio...
- Oracle 10gR2 load balancing - Part2 - Client-Side ...
- Oracle 10gR2 load balancing - Part1
- Oracle database tuning without any tools - using p...
- Oracle database tuning without any tools - using p...
- Oracle database tuning without any tools - using p...
- Oracle database tuning without any tools - using p...
- Quick DBA Test - Oracle 10g
- what are the major new featurs in Oracle 10g data ...
- Flashback version query in oracle 10g
- Optimizing Performance of Direct Path Loads
- Data Conversion During Direct Path Loads
- Data Loading Methods - SQL Loader
- How Does Data Pump Access Data?
- Oracle data pump 10g impdp help
- Oracle data pump 10g expdp help
- Exporting and Importing External tables using Data...
- Oracle 10g Data Pump APIs
- Difference between old exp/imp and new data pump e...
- Oracle Data pump 10g getting started
- Oracle Data Pump in Oracle Database 10g
- What is FLASHBACK TABLE ? Explain with examples?
- What is Oracle Secure Backup (OSB)?
- What is auxiliary instance? when it is created?
- Automatic Instance Creation for RMAN TSPITR
- Oracle 10 RMAN Views
- How to setup RMAN in Oracle 9i
- What is block pinging and why is it so bad?
- Can I test if a database is running in RAC mode?
- How does one stop and start RAC instances?
- How does one convert a single instance database to...
- How many OCR and voting disks should one have?
- Do you need special hardware to run RAC?
- Can any application be deployed on RAC?
- Oracle Real Application Clusters (RAC) FAQ - previ...
- Backup Scripts When Few Data Blocks Change
- Improving Incremental Backup Performance: Change T...
- Incrementally Updated Backups: A One Week Example
- Basic Incremental Backup Strategy
- Cumulative Incremental Backups
- Differential Incremental Backups
- Level 0 and Level 1 Incremental Backups
- RMAN Incremental Backups
- Using Compressed Backupsets
-
▼
September
(261)
Posts
No comments:
Post a Comment