Here is a list of enhanced RMAN features:
Automated Channel Failover for Backup and Restore - Recovery Manager (RMAN) now automatically retries a failed backup or restore operation, reducing the risk of stranding you without a backup of the Oracle database because of an error.
Automated File Creation During Recovery - This feature enhances RMAN recovery by automatically creating and recovering datafiles that have never been backed up.
Simplified Backups to Disk - Image backups provide fast recovery by being readily usable. The Recovery Manager (RMAN) BACKUP command has been enhanced to perform image copy backups at the database, tablespace, and datafile level.
Proxy Copy Backup of Archivelogs - You can now back up archive logs by using the Recovery Manager (RMAN) Proxy Copy.
Incrementally Updated Backups - You can now apply a Recovery Manager (RMAN) incremental backup to a datafile image backup. This results in reduced recovery time, because fewer logs need to be applied, and reduced time to back up the database, because you do not always have to back up the whole database.
Simplified Recovery Through Resetlogs - You no longer have to backup your database following an incomplete recovery or an OPEN RESETLOGS operation. This is an enabling feature for Flashback Reinstantiation.
Full Database Begin Backup Command - It is no longer necessary to issue a separate command to place each tablespace in hot backup mode. You can now use the ALTER DATABASE statement to place all tablespaces in backup mode. Also, the BEGIN BACKUP command now runs faster than before.
Changes to the ALTER DATABASE END BACKUP Command - You can issue the ALTER DATABASE END BACKUP command when the database is open.
Change-Aware Incremental Backups - By using a new type of log file to track blocks that have changed in the database, Recovery Manager (RMAN) can avoid scanning the entire datafile during an incremental backup. Instead, the amount of data scanned is proportional to the amount of data changed.
Automated Disk-Based Backup and Recovery - This release supports automated disk-based backup and recovery. The result is a simplified and unified storage location for backups, archivelogs, and any other files needed for Oracle recovery. It also provides automatic deletion of the files after they have been successfully backed up by RMAN, and the equivalent of a disk cache for tape, which reduces the time needed to restore a file from tape. It reduces the risk of an out-of-space condition on disk by deleting files that are no longer necessary for successful database recovery.
RMAN Database Dropping and Deregistration - The new DROP DATABASE and UNREGISTER DATABASE RMAN commands remove the database and its entry from the RMAN recovery catalog.
Automated TSPITR Instantiation - This feature automatically creates the auxiliary instance needed to perform tablespace point-in-time recovery (TSPITR) and incorporates the RMAN TSPITR operations.
Simplified Recovery Manager Cataloging of Backup Files - You can now catalog RMAN proprietary backup metadata into a backup repository. If a backup is overwritten in the control file, or a backup file is moved to a new location on disk, then you can easily uncatalog the backup metadata from the repository.
Oracle 10 DBA Interview questions and answers
1. Is the following SQL statement syntactically correct? If not, please rewrite it correctly.
SELECT col1 FROM tableA WHERE NOT IN (SELECT col1 FROM tableB);
Ans. SQL is incorrect.
Correct SQL : SELECT col1 FROM tableA WHERE col1 NOT IN (SELECT col1 FROM tableB);
2. What is a more efficient way to write this query, to archive the same set?
Ans: SELECT col1 from tableA minus SELECT col1 from tableB
3.How would you determine that the new query is more efficient than the original query?
Ans: Run explain plan on both query and see the result .
4.How can we find the location of the database trace files from within the data dictionary?
Ans: Generally trace file on the database server machine is located in one of two locations:
1. If you are using a dedicated server connection, the trace file will be generated in the directory specified by
the USER_DUMP_DEST parameter.
2.If you are using a shared server connection, the trace file will be generated in the directory specified by the
BACKGROUND_DUMP_DEST parameter.
you can run sqlplus>SHOW PARAMETER DUMP_DEST
or
select name, value
from v$parameter
where name like '%dump_dest%'
5. What is the correct syntax for a UNIX endless WHILE loop?
while :
do
commands
done
6. Write the SQL statement that will return the name and size of the largest datafile in the database.
SQL> select name,bytes from v$datafile where bytes=(select max(bytes) from v$datafile);
7. What are the proper steps to changing the Oracle database block size?
cold backup all data files and backup controlfile to trace, recreate your database
with the new block size using the backup control file, and restore. It may be easier
with rman. You can not change datbase block size on fly.
8. Using awk, write a script to print the 3rd field of every line.
Ans:
awk '{print }'
awk '{print $3}
awk '{print $3}
9.Under what conditions, is a nested loop better than a merge join?
Ans:
Optimizer uses nested loop when we are joining tables containing small number of rows with an efficient driving
condition.
It is important to have an index on column of inner join table as this table is probed every time for a new value
from outer table.
Optimizer may not use nested loop in case:
1. No of rows of both the table is quite high
2. Inner query always results in same set of records
3. The access path of inner table is independent of data coming from outer table.
merge join is used to join two independent data sources. They perform better than nested loop when the volume of
data is big in tables
but not as good as hash joins in general.
10.Which database views would you use to ascertain the number of commits a user's session has performed?
Joining V$SESSTAT ,V$STATNAME
select * from V$SESSTAT a ,V$STATNAME b where b.CLASS=a.STATISTIC# and b.NAME='user commits' and a.sid=
11.What does the #!bin/ksh at the beginning of a shell script do? Why should it be there?
Ans: On the first line of an interpreter script, the "#!", is the name of a program which should be used to
interpret the contents of the file.
For instance, if the first line contains "#! /bin/ksh", then the contents of the file are executed as a korn shell
script.
12.What command is used to find the status of Oracle 10g Clusterware (CRS) and the various components it manages
(ONS, VIP, listener, instances, etc.)?
Ans:
$ocrcheck
13.Describe a scenario in which a vendor clusterware is required, in addition to the Oracle 10g Clusterware.
If you choose external redundancy for the OCR and voting disk, then to enable redundancy, the disk subsystem must be configurable for RAID mirroring/vendor clusterware. Otherwise, your system may be vulnerable because the OCR and voting disk are single points of failure.
14.How would you find the interconnect IP address from any node within an Oracle 10g RAC configuration?
using oifcfg command.
se the oifcfg -help command to display online help for OIFCFG. The elements of OIFCFG commands, some of which are
optional depending on the command, are:
*nodename—Name of the Oracle Clusterware node as listed in the output from the olsnodes command
*if_name—Name by which the interface is configured in the system
*subnet—Subnet address of the interface
*if_type—Type of interface: public or cluster_interconnect
You can use OIFCFG to list the interface names and the subnets of all of the interfaces available on the local node
by executing the iflist keyword as shown in this example:
oifcfg iflist
hme0 139.185.141.0
qfe0 204.152.65.16
You can also retrieve specific OIFCFG information with a getif command using the following syntax:
oifcfg getif [ [-global | -node nodename] [-if if_name[/subnet]] [-type if_type] ]
To store a new interface use the setif keyword. For example, to store the interface hme0, with the subnet
139.185.141.0, as a global interface (to be used as an interconnect for all of the RAC instances in your cluster),
you would use the command:
oifcfg setif -global hme0/139.185.141.0:cluster_interconnect
For a cluster interconnect that exists between only two nodes, for example rac1 and rac2, you could create the cms0
interface with the following commands, assuming 139.185.142.0 is the subnet addresses for the interconnect on rac1
and rac2 respectively:
oifcfg setif -global cms0/139.185.142.0:cluster_interconnect
Use the OIFCFG delif command to delete the stored configuration for global or node-specific interfaces. A specific
node-specific or global interface can be deleted by supplying the interface name, with an optional subnet, on the
command line. Without the -node or -global options, the delif keyword deletes either the given interface or all of
the global and node-specific interfaces on all of the nodes in the cluster. For example, the following command
deletes the global interface named qfe0 for the subnet 204.152.65.0:
oifcfg delif -global qfe0/204.152.65.0
On the other hand, the next command deletes all of the global interfaces stored with OIFCFG:
oifcfg delif -global
15.What is the Purpose of the voting disk in Oracle 10g Clusterware?
Voting disk record node membership information. Oracle Clusterware uses the voting disk to determine which instances are members of a cluster. The voting disk must reside on a shared disk. For high availability, Oracle recommends that you have a minimum of three voting disks. If you configure a single voting disk, then you should use external mirroring to provide redundancy. You can have up to 32 voting disks in your cluster.
16.What is the purpose of the OCR in Oracle 10g Clusterware?
Ans: Oracle Cluster Registry (OCR) is a component in 10g RAC used to store the cluster configuration information. It is a shared disk component, typically located in a shared raw volume that must be accessible to all nodes in the cluster.
The daemon OCSSd manages the configuration info in OCR and maintains the changes to cluster in the registry.
17. In Oracle Streams archived log downstream capture, which database view can be used to determine which archived
logs are no longer needed by the capture process?
Ans: V$ARCHIVE_DEST_STATUS
SELECT col1 FROM tableA WHERE NOT IN (SELECT col1 FROM tableB);
Ans. SQL is incorrect.
Correct SQL : SELECT col1 FROM tableA WHERE col1 NOT IN (SELECT col1 FROM tableB);
2. What is a more efficient way to write this query, to archive the same set?
Ans: SELECT col1 from tableA minus SELECT col1 from tableB
3.How would you determine that the new query is more efficient than the original query?
Ans: Run explain plan on both query and see the result .
4.How can we find the location of the database trace files from within the data dictionary?
Ans: Generally trace file on the database server machine is located in one of two locations:
1. If you are using a dedicated server connection, the trace file will be generated in the directory specified by
the USER_DUMP_DEST parameter.
2.If you are using a shared server connection, the trace file will be generated in the directory specified by the
BACKGROUND_DUMP_DEST parameter.
you can run sqlplus>SHOW PARAMETER DUMP_DEST
or
select name, value
from v$parameter
where name like '%dump_dest%'
5. What is the correct syntax for a UNIX endless WHILE loop?
while :
do
commands
done
6. Write the SQL statement that will return the name and size of the largest datafile in the database.
SQL> select name,bytes from v$datafile where bytes=(select max(bytes) from v$datafile);
7. What are the proper steps to changing the Oracle database block size?
cold backup all data files and backup controlfile to trace, recreate your database
with the new block size using the backup control file, and restore. It may be easier
with rman. You can not change datbase block size on fly.
8. Using awk, write a script to print the 3rd field of every line.
Ans:
awk
awk '{print $3}
awk '{print $3}
9.Under what conditions, is a nested loop better than a merge join?
Ans:
Optimizer uses nested loop when we are joining tables containing small number of rows with an efficient driving
condition.
It is important to have an index on column of inner join table as this table is probed every time for a new value
from outer table.
Optimizer may not use nested loop in case:
1. No of rows of both the table is quite high
2. Inner query always results in same set of records
3. The access path of inner table is independent of data coming from outer table.
merge join is used to join two independent data sources. They perform better than nested loop when the volume of
data is big in tables
but not as good as hash joins in general.
10.Which database views would you use to ascertain the number of commits a user's session has performed?
Joining V$SESSTAT ,V$STATNAME
select * from V$SESSTAT a ,V$STATNAME b where b.CLASS=a.STATISTIC# and b.NAME='user commits' and a.sid=
11.What does the #!bin/ksh at the beginning of a shell script do? Why should it be there?
Ans: On the first line of an interpreter script, the "#!", is the name of a program which should be used to
interpret the contents of the file.
For instance, if the first line contains "#! /bin/ksh", then the contents of the file are executed as a korn shell
script.
12.What command is used to find the status of Oracle 10g Clusterware (CRS) and the various components it manages
(ONS, VIP, listener, instances, etc.)?
Ans:
$ocrcheck
13.Describe a scenario in which a vendor clusterware is required, in addition to the Oracle 10g Clusterware.
If you choose external redundancy for the OCR and voting disk, then to enable redundancy, the disk subsystem must be configurable for RAID mirroring/vendor clusterware. Otherwise, your system may be vulnerable because the OCR and voting disk are single points of failure.
14.How would you find the interconnect IP address from any node within an Oracle 10g RAC configuration?
using oifcfg command.
se the oifcfg -help command to display online help for OIFCFG. The elements of OIFCFG commands, some of which are
optional depending on the command, are:
*nodename—Name of the Oracle Clusterware node as listed in the output from the olsnodes command
*if_name—Name by which the interface is configured in the system
*subnet—Subnet address of the interface
*if_type—Type of interface: public or cluster_interconnect
You can use OIFCFG to list the interface names and the subnets of all of the interfaces available on the local node
by executing the iflist keyword as shown in this example:
oifcfg iflist
hme0 139.185.141.0
qfe0 204.152.65.16
You can also retrieve specific OIFCFG information with a getif command using the following syntax:
oifcfg getif [ [-global | -node nodename] [-if if_name[/subnet]] [-type if_type] ]
To store a new interface use the setif keyword. For example, to store the interface hme0, with the subnet
139.185.141.0, as a global interface (to be used as an interconnect for all of the RAC instances in your cluster),
you would use the command:
oifcfg setif -global hme0/139.185.141.0:cluster_interconnect
For a cluster interconnect that exists between only two nodes, for example rac1 and rac2, you could create the cms0
interface with the following commands, assuming 139.185.142.0 is the subnet addresses for the interconnect on rac1
and rac2 respectively:
oifcfg setif -global cms0/139.185.142.0:cluster_interconnect
Use the OIFCFG delif command to delete the stored configuration for global or node-specific interfaces. A specific
node-specific or global interface can be deleted by supplying the interface name, with an optional subnet, on the
command line. Without the -node or -global options, the delif keyword deletes either the given interface or all of
the global and node-specific interfaces on all of the nodes in the cluster. For example, the following command
deletes the global interface named qfe0 for the subnet 204.152.65.0:
oifcfg delif -global qfe0/204.152.65.0
On the other hand, the next command deletes all of the global interfaces stored with OIFCFG:
oifcfg delif -global
15.What is the Purpose of the voting disk in Oracle 10g Clusterware?
Voting disk record node membership information. Oracle Clusterware uses the voting disk to determine which instances are members of a cluster. The voting disk must reside on a shared disk. For high availability, Oracle recommends that you have a minimum of three voting disks. If you configure a single voting disk, then you should use external mirroring to provide redundancy. You can have up to 32 voting disks in your cluster.
16.What is the purpose of the OCR in Oracle 10g Clusterware?
Ans: Oracle Cluster Registry (OCR) is a component in 10g RAC used to store the cluster configuration information. It is a shared disk component, typically located in a shared raw volume that must be accessible to all nodes in the cluster.
The daemon OCSSd manages the configuration info in OCR and maintains the changes to cluster in the registry.
17. In Oracle Streams archived log downstream capture, which database view can be used to determine which archived
logs are no longer needed by the capture process?
Ans: V$ARCHIVE_DEST_STATUS
Subscribe to:
Post Comments (Atom)
Blog Archive
-
▼
2008
(277)
-
▼
September
(261)
- Setting oracle database in archive mode from non-a...
- Oracle Version Information - How to CheckYour Curr...
- Database and Instance Shutdown
- Database and Instance Shutdown
- What Happens When You Open a Database
- How to Identify Your Oracle Database Software Release
- What is block change tracking in RMAN Oracle 10g
- What is Incremental Merge in RMAN 10g?
- Moving from DBMS_JOB to DBMS_SCHEDULER
- Moving from DBMS_JOB to DBMS_SCHEDULER
- Moving from DBMS_JOB to DBMS_SCHEDULER
- Moving from DBMS_JOB to DBMS_SCHEDULER
- Oracle Database 10g Scheduler - Associating Jobs w...
- Oracle Database 10g Scheduler - Creating Jobs With...
- Oracle Database 10g Scheduler
- DBMS_JOB Package
- Data Guard Database Synchronization Options
- Data Guard Role Management
- Data Guard Broker
- Data Guard Protection Modes
- Redo Apply and SQL Apply
- Data Guard Benefits
- Creating a Nested Materialized View: Example
- Creating a Fast Refreshable Materialized View: Exa...
- Automatic Refresh Times for Materialized Views: Ex...
- Periodic Refresh of Materialized Views: Example
- Creating Rowid Materialized Views: Example
- Creating Primary Key Materialized Views: Example
- Creating Subquery Materialized Views: Example
- Creating Prebuilt Materialized Views: Example
- Creating Materialized Join Views: Example
- Creating Materialized Aggregate Views: Example
- Privilages to create a refresh-on-commit materiali...
- Privilages to create a materialized view in anothe...
- What Privilages required to create a materialized ...
- What is materialized view?
- What is Optimizer Plan Stability?
- DBMS_ADVISOR Package
- What is Bigfile tablespace? why do we create it? w...
- Reverting a Table to its Previous Statistics
- Manipulating Statistics Using DBMS_STATS
- Copying Statistics Using DBMS_STATS
- Gathering statistics with DBMS_STAT Package
- Handling Errors During Backups: Example
- Backup Validation with RMAN
- Detection of Logical Block Corruption
- Detecting Physical and Logical Block Corruption
- Tests and Integrity Checks for Backups?
- When RMAN Performs Control File Autobackups
- How RMAN Performs Control File Autobackups?
- what command do you execute to ensure that the con...
- Which background processes coordinates the rebalan...
- Which background processes coordinates the rebalan...
- What is oracle ASM in Oracle 10g? How do we create...
- Load Balancing In Oracle 10g Real Application Clus...
- Oracle 10gR2 load balancing - Server side load bal...
- Oracle 10gR2 load balancing- Client-Side Connectio...
- Oracle 10gR2 load balancing - Part2 - Client-Side ...
- Oracle 10gR2 load balancing - Part1
- Oracle database tuning without any tools - using p...
- Oracle database tuning without any tools - using p...
- Oracle database tuning without any tools - using p...
- Oracle database tuning without any tools - using p...
- Quick DBA Test - Oracle 10g
- what are the major new featurs in Oracle 10g data ...
- Flashback version query in oracle 10g
- Optimizing Performance of Direct Path Loads
- Data Conversion During Direct Path Loads
- Data Loading Methods - SQL Loader
- How Does Data Pump Access Data?
- Oracle data pump 10g impdp help
- Oracle data pump 10g expdp help
- Exporting and Importing External tables using Data...
- Oracle 10g Data Pump APIs
- Difference between old exp/imp and new data pump e...
- Oracle Data pump 10g getting started
- Oracle Data Pump in Oracle Database 10g
- What is FLASHBACK TABLE ? Explain with examples?
- What is Oracle Secure Backup (OSB)?
- What is auxiliary instance? when it is created?
- Automatic Instance Creation for RMAN TSPITR
- Oracle 10 RMAN Views
- How to setup RMAN in Oracle 9i
- What is block pinging and why is it so bad?
- Can I test if a database is running in RAC mode?
- How does one stop and start RAC instances?
- How does one convert a single instance database to...
- How many OCR and voting disks should one have?
- Do you need special hardware to run RAC?
- Can any application be deployed on RAC?
- Oracle Real Application Clusters (RAC) FAQ - previ...
- Backup Scripts When Few Data Blocks Change
- Improving Incremental Backup Performance: Change T...
- Incrementally Updated Backups: A One Week Example
- Basic Incremental Backup Strategy
- Cumulative Incremental Backups
- Differential Incremental Backups
- Level 0 and Level 1 Incremental Backups
- RMAN Incremental Backups
- Using Compressed Backupsets
-
▼
September
(261)
Posts
No comments:
Post a Comment